Refinished Patio Furniture/Looks Brand New!!!

admin • July 16, 2014

                         (BEFORE PICTURES) V__7AF2 V__FAB4

We had a lady from Northern Utah call us about her patio furniture. She had acquired several different pieces of outdoor furniture. They were random in colors & styles, and didn’t match; but she loved the unique design of each piece of furniture, and wanted to turn them into something more.
She was very particular about the color, because she was color matching against the trim on her house. With over 65,000 colors and textures to choose from, we at Full Blown Coatings, were able to color match our Tundra Green with her house trim exactly. She was thrilled that she could keep each piece of patio furniture, that not only match each other, but now match her house perfectly.
Full Blown Coatings sand blasted, powder coated, & transformed her sun-faded, worn-out, furniture, into a beautiful, complimentary patio set.

                                                                                   (AFTER PICTURE)

Refinished Patio Furniture
Refinished Patio Furniture

 

Share This Post!

Welder joining black steel frame rails outdoors with sparks at the weld
By Admin • October 12, 2026
Planning trailer sandblasting in Utah? See what to tear down, why primer matters, what fits our oven, and how to plan a drop-off at our Sandy, UT shop.
Ornate cast iron park bench with a dark bronze coated finish on green grass beside a brick walkway
By Admin • October 6, 2026
Plan powder coating cast iron: blast prep, outgassing risks, primer notes, and Sandy, UT drop-off tips from Full Blown Coatings.
Brushed stainless steel handrail mounted on a concrete wall with soft shadows
By Admin • October 1, 2026
Powder coating stainless steel takes blast prep, clean welds, and the right plan. See what to ask and how to drop off parts in Sandy, UT.
Red powder-coated brake caliper behind alloy wheel
By Admin • September 30, 2026
Plan powder coating brake calipers: blast prep, heat and masking notes, color options, and Sandy, UT drop-off tips from Full Blown Coatings.
Outdoor galvanized steel panels with a powder-coated finish
By Admin • September 28, 2026
Yes, with the right prep. Learn adhesion risks, blast notes, and when powder over galvanized steel makes sense. Full Blown Coatings, Sandy, UT.
Adult black road bicycle displayed against a wood-paneled wall
By Admin • September 12, 2026
Learn powder coating bike frame prep: what to strip, what to mask, aluminum primer tips, and drop-off steps from Full Blown Coatings in Sandy, UT.
Wrought iron gate with decorative scrollwork ready for powder coating
By Admin • September 8, 2026
Planning wrought iron powder coating for a gate, railing, or fence section? See removable vs fixed rules, outdoor prep, and drop-off tips in Sandy, UT.
Industrial aluminum powder coating inside a curing booth at Full Blown Coatings in Sandy, Utah, for
By Admin • September 8, 2026
Learn whether aluminum can be powder coated, including preparation, outgassing, primer, and best practices from Full Blown Coatings.
Dark gray sports car parked at night outside a lit garage with neon signage
By Admin • September 7, 2026
Searching for Cerakote in Northern Utah? Learn how to choose a shop, compare Cerakote with powder coating, and plan a quote with Full Blown Coatings in Sandy.
Rusty cream and orange vintage pickup truck at an outdoor car show, with weathered paint and rust patches
By Admin • September 1, 2026
Searching for automotive sandblasting near you? see which vehicle parts suit blasting, how to prep for them, what to ask the shop, and how to get an accurate quote