How Is Powder Coat Better than Spray Paint?

admin • February 9, 2015

powder coating Many characteristics of powder coat make it a superior alternative to wet spray paint, including the following.

Dry Film Thickness –  Powder coat is 4 to 10 times thicker than traditional liquid spray paint.  Wet paints are applied in thicknesses of 0.5 to 1 mil (a mil is one one-thousandths of an inch, or 0.001-inch).  Powder coat is applied in thicknesses of 2 to 6 mils for decorative finishes or 6 to 10 mils (and thicker) for functional finishes.

Hardness –  Decorative powder coat is physically harder than wet paint.  This property translates into significantly greater scratch and chip resistance, and thus generally better durability.

Adhesion –  Powder coat adheres to the substrate better than spray paint.  Partially a function of the sophisticated pretreatment process that all parts go through prior to coating, the excellent adhesion contributes to chip resistance as well as corrosion resistance.

Flexibility –  Powder coat can withstand bending without cracking or flaking.  Powder manufacturers publish flexibility test results that demonstrate between 100-800% elongation before failing!

Corrosion Resistance –  Proper pretreatment and powder coat finish selection results in corrosion resistance which can far surpass traditional spray paint.  Published decorative powder coat test results show salt spray tests of 1000 hours and longer without failure, and functional coatings are even more corrosion resistant.  That’s not to say powder coat cannot be scratched, because if you work hard enough you can scratch anything.  With traditional spray paint the rust at a scratch exposed to the elements will spread and lift the surrounding paint until the finish is ruined.  With an appropriate powder coat finish, a deep scratch left in the elements long enough to ruin spray paint will still be a rusty scratch.

Environmental Impact –  Powder coat is an environmentally friendly process.  The powder is not a significant health, fire, or environmental hazard (in dry form it is called a “nuisance dust” because it makes a dusty mess if spilled).  As a comparison, wet paint is flammable, carcinogenic, and full of volatile organic compounds (VOCs).

Share This Post!

Welder joining black steel frame rails outdoors with sparks at the weld
By Admin • October 12, 2026
Planning trailer sandblasting in Utah? See what to tear down, why primer matters, what fits our oven, and how to plan a drop-off at our Sandy, UT shop.
Ornate cast iron park bench with a dark bronze coated finish on green grass beside a brick walkway
By Admin • October 6, 2026
Plan powder coating cast iron: blast prep, outgassing risks, primer notes, and Sandy, UT drop-off tips from Full Blown Coatings.
Brushed stainless steel handrail mounted on a concrete wall with soft shadows
By Admin • October 1, 2026
Powder coating stainless steel takes blast prep, clean welds, and the right plan. See what to ask and how to drop off parts in Sandy, UT.
Red powder-coated brake caliper behind alloy wheel
By Admin • September 30, 2026
Plan powder coating brake calipers: blast prep, heat and masking notes, color options, and Sandy, UT drop-off tips from Full Blown Coatings.
Outdoor galvanized steel panels with a powder-coated finish
By Admin • September 28, 2026
Yes, with the right prep. Learn adhesion risks, blast notes, and when powder over galvanized steel makes sense. Full Blown Coatings, Sandy, UT.
Adult black road bicycle displayed against a wood-paneled wall
By Admin • September 12, 2026
Learn powder coating bike frame prep: what to strip, what to mask, aluminum primer tips, and drop-off steps from Full Blown Coatings in Sandy, UT.
Wrought iron gate with decorative scrollwork ready for powder coating
By Admin • September 8, 2026
Planning wrought iron powder coating for a gate, railing, or fence section? See removable vs fixed rules, outdoor prep, and drop-off tips in Sandy, UT.
Industrial aluminum powder coating inside a curing booth at Full Blown Coatings in Sandy, Utah, for
By Admin • September 8, 2026
Learn whether aluminum can be powder coated, including preparation, outgassing, primer, and best practices from Full Blown Coatings.
Dark gray sports car parked at night outside a lit garage with neon signage
By Admin • September 7, 2026
Searching for Cerakote in Northern Utah? Learn how to choose a shop, compare Cerakote with powder coating, and plan a quote with Full Blown Coatings in Sandy.
Rusty cream and orange vintage pickup truck at an outdoor car show, with weathered paint and rust patches
By Admin • September 1, 2026
Searching for automotive sandblasting near you? see which vehicle parts suit blasting, how to prep for them, what to ask the shop, and how to get an accurate quote