Sports That Benefit from Powder Coating

admin • September 1, 2015

A skier is doing a trick in the air while skiing down a snow covered slope. In modern day life, there are countess applications for powder coating finishes. Sometimes, it has indeed become so common in everyday life that we may forget, or not even notice, when it is being done around us. One such place that powder coating has been found to be in is the world of sports. Here are just some of the sports that benefit from powder coating finishes.

Skiing

The elements can be quite tough in the world of skiing. The very basis of the sport is that it takes place high up in snow covered mountains. Because of the evolution to metal ski rails, spindles and frames, ski manufacturers have utilized the benefits of powder coating finishes. Powder coatings can make aluminum ski parts resistant to the water corrosion that they would otherwise suffer from, making sure your ski gear can last a long time.

Baseball

 

There are many great aesthetic qualities of baseball, but an aluminum baseball bat has never been one of them. The manufactured metal texture has never been very appealing, and will dent and warp over time, making the bat hardly usable. Lately, many baseball players have begun to use powder coating on their baseball bats. They do this not just because it looks better, but because it can protect the bat from the wear and tear of continued use, making them last longer. The powder coating also doesn’t effect the force of hitting a ball.

 

Racing

There are many parts that go into making a finely tuned racecar. And in order to function to the best of its potential, each one of those parts need to be in the best condition that they can. For this reason, nearly every racecar you see is utilizing a powder coated finish in different ways. Putting your chassis in a powder coat will make the frame of your vehicle stronger, and can protect the car over continued use. The powder coating is also incredibly resistant to heat, making it a very useful component in protecting parts in the engine, which could be susceptible to extreme temperatures.

Boating

There are many parts on boats, nowadays, that need to be made up of metal to be truly efficient. However, it can cause a lot of problems on the open sea when every inch of your boat will probably be tested by the water at some point. Whether you are a sailor or out racing a motorboat, getting a powder coat finish will protect those metal parts of your boat from rust and water damage, even if you are in a body of salt water, which is known to be more destructive. The powder coating also fits in great with the boating aesthetic, and can make a vessel look mighty fine!

The post Sports That Benefit from Powder Coating appeared first on Full Blown Coatings.

Share This Post!

Steel car fender on a shop stand, half stripped to bare gray metal, half in old flaking red paint
By Admin • October 26, 2026
Soda blasting strips paint from thin sheet metal and aluminum without cutting the metal. See where it fits, its limits vs sandblasting, and get a quote.
Rusted steel surface with peeling paint that needs sandblasting before it can be coated
By Admin • October 26, 2026
Need a rust removal service in Utah? See how our Sandy shop inspects, blasts, and coats rusted metal, what blasting reveals, and how pricing works.
Close-up of a bare metal engine block showing the cylinder bores
By Admin • October 24, 2026
Plan powder coating engine parts: what to strip, how to mask blocks and intakes, outgassing on castings, and what to expect on pricing in Sandy, UT.
Steel furniture frame half stripped by blasting, worn black powder coat next to bare gray steel
By Admin • October 23, 2026
Powder coat removal explained: blasting vs chemical vs burn-off, why coating over old powder is risky, and how to prep a part for our Sandy, UT shop.
Red powder-coated aluminum part next to a bare aluminum part on a shop bench
By Admin • October 22, 2026
Powder coating vs anodizing for aluminum: how each finish works, color and fade limits, when an anodizer is the better call, and how to plan a powder job.
Weathered steel utility trailer parked outside, ready for sandblasting and powder coating restoratio
By Admin • October 12, 2026
Planning trailer sandblasting in Utah? See what to tear down, why primer matters, what fits our oven, and how to plan a drop-off at our Sandy, UT shop.
Ornate cast iron park bench with a dark bronze coated finish on green grass beside a brick walkway
By Admin • October 6, 2026
Plan powder coating cast iron: blast prep, outgassing risks, primer notes, and Sandy, UT drop-off tips from Full Blown Coatings.
Brushed stainless steel handrail mounted on a concrete wall with soft shadows
By Admin • October 1, 2026
Powder coating stainless steel takes blast prep, clean welds, and the right plan. See what to ask and how to drop off parts in Sandy, UT.
Red powder-coated brake caliper behind alloy wheel
By Admin • September 30, 2026
Plan powder coating brake calipers: blast prep, heat and masking notes, color options, and Sandy, UT drop-off tips from Full Blown Coatings.
Outdoor galvanized steel panels with a powder-coated finish
By Admin • September 28, 2026
Yes, with the right prep. Learn adhesion risks, blast notes, and when powder over galvanized steel makes sense. Full Blown Coatings, Sandy, UT.